Wetherill Park
Padstow
Central Coast
Wollongong

PH: 02 9756 3737
PH: 02 9772 4400
PH: 02 4352 3111
PH: 02 4271 6683

 
 
 
 
 
 
 
 

Categories

 
 
 
   
 
 
 

Sale

 

 
 

Get a Quote

 
 
 
 

Colour Selection

 
 
 
 
 
 
 
 

LYSAGHT CUSTOM BLUE ORB®

 

LYSAGHT CUSTOM BLUE ORB®
Corrugated roofing & walling, suitable for curving

LYSAGHT CUSTOM BLUE ORB® is the traditional corrugated roofing profile, designed specifically for curving. The extra ductility of LYSAGHT CUSTOM BLUE ORB® allows for easy curving.

  • Curving quality of steel which can be curved to a variety of designs
  • Can be used for both roofing and walling applications
  • Long lengths allow sheets to be curved into a full circle
  • Available in a wide variety of COLORBOND® steel colours

Note:

  • There are straight sections at the ends of the curve which cannot be curved, read details in Product Specification section
  • May be used on roof pitches from as low as 5 degrees (1 in 12)
  • Read our Guidelines for using COLORBOND steel & ZINCALUME steel.

LYSAGHT CUSTOM BLUE ORB® is available in the standard range of COLORBOND® steel colours and in unpainted ZINCALUME® steel.

Lengths
Sheets are supplied custom cut.

Tolerance (CUSTOM ORB & CUSTOM BLUE ORB) - flat
Length: +10 mm, -10 mm
Width: +4 mm, -4 mm


Curving Radii
The minimum curving radius is 300 mm (400 mm in Victoria). At the end of the curve, there must be a straight vertical section of at least 100 mm (80 mm in Victoria)


Curved Flashings
Curved flashings and cappings are made in fibreglass, plastic and steel in standard COLORBOND® steel colours.
Straight flashings and cappings are also made to match. 


Material Specification
CUSTOM BLUE ORB is made from:

  • ZINCALUME® aluminium/zinc alloy-coated steel complying with AS1397-2011 G300, AZ 150(300MPa minimum yield stress, 150g/m2 minimum coating mass);
  • ZINCFORM® zinc coated (galvanised) steel complying with AS1397-2011 G300, Z600 (300MPa minimum yield stress, 600g/m2 minimum coating mass);

All the materials cover either 608mm or 762mm

COLORBOND® steel base metal thickness is 0.60mm or 0.80 mm. The COLORBOND® prepainted steel complies with AS/NZS 2728:2007.

Schematic

  • LYSAGHT CUSTOM ORB®
  • LYSAGHT CUSTOM ORB ACCENT™
  • LYSAGHT TRIMDEK®
  • LYSAGHT SPANDEK®
  • LYSAGHT KLIP-LOK® 406
  • LYSAGHT KLIP-LOK 700

Contact Details

Email:sales@allmetalaust.com.au

Request More Information

Details of the product above will be automatically included with your enquiry.

 
 
 


© Copyright All Metal (Australia) Pty Ltd - Site map Australia

Online Shop Creation